|
2.1 SUPPLIERS
A. Acceptable Supplier: Classic Woodworking, LLC; 667 SE 32nd Ave, Hillsboro, OR 97123, Toll Free (800) 322-2267, Fax (503) 692-7070, Email: jhollman@classicwoodworking.com.
B. Substitutions: Not permitted.
C. Requests for substitutions will be considered in
accordance with provisions of Section 01600.
2.2 LOCKERS
A. Locker Frame: Interior
constructed of 5/8" high density, high impact,
stain and abrasion resistant, saturated, thermo fused
almond colored melamine, finished on both sides. Visible
edges finished with a 2 millimeter PVC edge banding
to closely match locker doors. Tops, bottoms, sides,
backs and shelves are precision machined.
B. Construction:
1. Laminate: 5/8 inch high-industrial
grade core with .030 inch vertical grade high pressure
Class II-B fire retardant
plastic laminate. Door edges are radiused and banded
with 2 mm PVC edge banding to closely match
laminate.
a.
Select laminate color and finish (name and number) from
WilsonArt, Nevamar or Formica. Custom laminates
are available.
2. Wood Veneer: 3/4 inch A-1 plain
sliced veneer on MDF core, available in the door styles,
wood species and finishes
listed below, with 2 mm edge banding to closely match
wood veneer.
3. Veneered Raised Panel: 3/4 inch
A-1 plain sliced veneer styles, rails and panels on
MDF core with 2 mm edge
banding. All stile and rail joints are doweled and glued.
Standard or vertical grain direction available.
a.
Door Style:
1)
Shaker: 3/4 inch A-1 plain sliced veneer stiles, rails
and panels on MDF core with 3/16" flush veneer
center
panel.
2)
Flat Panel: 3/4 inch A-1 plain sliced veneer stiles,
rails and panels on MDF core with 3/16" flush veneer
center panel with 1/4 inch round mould.
3)
Raised Panel: 3/4 inch A-1 plain sliced veneer stiles,
rails and panels on MDF core.
4)
Louvered and Raised: 3/4 inch A-1 plain sliced veneer
stiles, rails and panels on MDF core with 3/4 inch
fixed position 1 3/8 inch louvers.
5)
Louvered: 3/4 inch fixed position 1 3/8 inch louvers.
C. Primary Wood Species: Pine, Maple, Birch, Red Oak,
Cherry, Mahogany, Hickory, Walnut, or Custom Species.
(Not applicable to plastic laminate lockers)
D. Finish: Clear, Cherry Mahogany, Dark Mahogany, Dark
Mahogany Toned, White Washed, Paint Grade, or Custom
Finish. All wood surfaces are finished with a catalyzed
lacquer applied in two coats with hand sanding between
coats, sealed with a moisture resistant top coat. (Not
applicable to plastic laminate lockers)
E. Accessories: Wood Framed Mirror, Lock Box (with Keyed
lock, Combination lock, Keyless security lock, Padlock
hasp), Shoe Cubbies, Wood Door Tray with Towel Bar (also
available without towel bar), Drawer with Knob or key
lock, Crown Moulding, Valance, Flat Top Panel.
F. Hardware: Number disk, Coat Rod, Coat Hook(s), Name
Plate, Door knobs, Pulls and Hinges (3 nickel finished,
concealed, heavy duty European steel hinges allowing
125 degree door opening on all doors over 42" H
and 2 on doors 42" or less). Standard hardware
will vary depending on locker model.
G. Lock Systems: Padlock hasp or heavy-duty five-pin
tumbler key lock standard on all lockers. Furnished
with two (2) master keys and two (2) user keys per lock.
Keyless Security Lock, Built In Combination Lock, DigiLock
KP-s & KT-s, Assa Abloy Card Key Lock, Safe-O-Mat
Coin Return Lock, Safe-O-Mat Coin Collect Lock, High
Security Stainless Steel Padlock Hasp also available.
Available finishes will vary.
H. Venting: 12 millimeter openings between door and
top and bottom of locker and dividers on multiple opening
frames provide continuous natural air flow.
2.3 FABRICATION
A. Locker shall be fabricated using doweled and glued
assembly process.
B. Fabricate locker parts square, rigid and without
warp, with the finished faces flat and free of scratches
and chips.
C. Machine attachment holes accurate and free of chips.
Attach fasteners as standard with manufacturer.
D. Fabricate corners and fillers as required for installation.
|
